Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
07 M-UP/REPEAT button
08 Forward (Frequency/CD track)
09 MEMORY/CLK-ADJ button
10 CD compartment
11 CD Stop button
12 Reverse (Frequency/CD track)
13 Remote control signal sensor
14 CD Play/ Pause
15 Display
16 FM Mono/Stereo selector
17 Tuner button
18 Adjust Volume (up/down)
19 Band selector
20 CD button
21 Headphones connection
22 CD compartment open/close button
23 Operating indicator
24 Mains plug
25 AUX button
26 Cinch connections for external devices (AUX)
27 Aerial connection
28 Loudspeaker connections
4
OPERATION
NOTE:
You can make also use the convenient remote control to make all the adjustments to the settings of your Designer Audio Unit.
(It is necessary to use it for the Sleep and Intro functions.)
5
SWITCHING ON AND OFF [ "POWER / STAND-BY " ]
•
If the mains plug is inserted, the equipment is in Stand-by mode. The Operating indicator (23) lights up red.
•
Press the ON/OFF button (1). The equipment is now in Operating mode. The Operating indicator (23) lights up green.
•
To switch back to Stand-by mode, press the ON/OFF button (1) again.
•
For longer periods of absence pull out the plug from the mains socket.
6
DEVICE/ SOURCE SELECT [ " CD / TUNER / TAPE / AUX " ]
•
Press the ON/OFF button (1) and select the sound source by using one of the following buttons: CD = CD player (20), TUNER = radio (17) or AUX = external device (25),
e.g. record deck
16
Werbung
Inhaltsverzeichnis
