Time And Date - Aqua Medic Light Computer Bedienungsanleitung

4. Starting
The Light Computer Set contains the control unit and a triple socket.
NOTE! For the connections pay attention to the following symbols and values:
1 = Main lighting metal halide lamp, maximum values:
2 = Secondary lighting, fluorescent lamps up to 150 Watt
3 = Moonlight, light bulbs up to 100 Watt
Starting:
1. Connect to 230 V power source.
2. Turn unit on by pressing the ON/OFF button.
5. Programming

5.1 Time and Date

After the unit has been turned on, the display indicates the TIME in hours and minutes (i. e.
14.49). By briefly pressing the TIME/DATE button, the DATE is displayed in day and month (i. e.
19.05).
Adjustment:
Press and hold TIME/DATE button until the date display is blinking.
• • • •
Press the +/- button to set the current date.
• • • •
Press the TIME/DATE button again to store the current date. Now, a flashing hour and minute
• • • •
indicator indicates the need to adjust the current time.
Set current time in the same manner as date.
• • • •
Press TIME/DATE button to store the current time.
• • • •
5.2 Lighting
For programming/adjustment of day and moon light consider the following displays:
A1 On-time of channel 1 (main lighting, metal halide lamps)
Off-time of channel 1
A2
On-time of channel 2 (secondary lighting, fluorescent lamps)
A3
Off-time of channel 2
A4
Intro-time of the moonlight (coupled with A1 and A2)
II.1
Diminishing-time of the moonlight
II.2
Daylight:
The daylight (channel 1 and channel 2) is adjusted by using the button SUN.
Press the SUN symbol:
- Initially, A1 is alternately displayed with the on-time of channel 1.
- Press + or - button to adjust the desired on-time and press SUN again to store it.
- Now, A2 is alternately displayed with the off-time of channel 1.
- Press + or - button to adjust the desired off-time and press SUN again to store it.
- Follow the same programming procedure for A3 (on-time channel 2) and A4 (off-time channel
2).
Press + or - button to adjust the desired off-time and press SUN again to store it.
-
Important: The difference between A1 and A2 must be more than one hour!!! A programming of
A2 past midnight is not possible.
4 x 70 W
3 x 150 W
2 x 250 W
1 x 400 W
7