Herunterladen Inhalt Inhalt Diese Seite drucken

Connecting To An Audio Visual Device - Yamaha PDM-4220 Bedienungsanleitung

High definition plasma monitor
Vorschau ausblenden Andere Handbücher für PDM-4220:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

INSTALLATION INSTRUCTIONS (continued)

Connecting to an Audio Visual Device

(1) Make sure that the power switch of the monitor is turned off.
(2) Make sure that the power switch of the audio visual device is turned off.
(3) Use a commercially available cable and connector to connect the signal input terminal on the rear panel of this
device and the signal output terminal of the audio visual device.
Antenna
• AV1 SCART applies to composite/S-video, and AV2 and AV3 SCART apply to composite/RGB.
• If a component input terminal and a composite input terminal of AV4 connect to the monitor at the same time, component input would
govern.
• If video equipment with an S video output terminal is used, cabling by the S video cable is recommended to provide finer video quality.
(If an S video input terminal and a video input terminal of AV5 (side input) connect to the monitor at the same time, S video input would
govern.)
• If the OUTPUT (Monitor) terminal is connected to an external monitor with a 75 Ohm terminal, it is possible to view the same image as on the
main unit. But it is possible to monitor only the composite video signal from AV1 ~ AV5 input that is displayed on the screen at the time.
• Set-Top Box is only for an AV1 input. (Tuner output signal is available only for AV1.)
• Secure connecting cables to the stand with the provided clamp.
HDMI
• HDMI (High-Definition Multimedia Interface) is a digital interface based on DVI (Digital Visual Interface), which is an added function for
audio-video equipment.
• It does not have degradation by transmission since it is digital.
• With only one cable, it is possible to transmit both picture signals and audio signals.
• In case of using analog audio, when connecting with DVI-HDMI transformation connector, use analog audio terminal for AV4 input.
SCART Specification
CVBS
S-video
AV1
AV2
AV3
Speaker (R)
RGB
Monitor (rear panel)
Power
cord
[
An example of connecting audio visual devices]
Speaker (L)
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis