Before Use - Panasonic EH-PHS9K Bedienungsanleitung

Before use

Heating the iron plate
Release the Open/Close
1
1
Lock.
Insert the plug into the household outlet.
2
2
Press the Power Switch to
3
3
turn on the straightener.
• The nanoe™ Lamp glows.
• Confirm that the Temperature
Setting Lamp for 150 is blinking.
►Note
• Do not use the straightener if all the Temperature
Setting Lamps are blinking.
Set a temperature by using
4
4
the Temperature Setting
Switches according to the
characteristics and
condition of your hair.
• When you use the straightener for the first time, be sure
to set the temperature to 150 °C.
• The temperature is raised using [+] and lowered using [–]
of the Temperature Setting Switches.
Indicator
Release
• Confirm that the Temperature Setting Lamp has
changed.
• When the selected Temperature Setting Lamp stops
blinking (and glows), the straightener has reached the
selected temperature.
(Note that the time taken to reach operating temperature
may vary depending on the operating environment.)
►Notes
• A temperature level of more than 200 is high and may
damage your hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
• After switching on, the straightener reaches operating
temperature (approximately 100 °C) after about
30 seconds.
Temperature Hair type
Approx. 230 °C
Wavy
Approx. 200 °C
Approx. 180 °C
Approx. 170 °C
Straight
Approx. 150 °C
Hair
condition
Less
damaged
Damaged
13