Take A Ride; Reviewing Rides; Choosing Rides And Viewing Data - Timex Cycle Trainer 2.0 Schnellstartanleitung

In order to obtain a GPS fix:
1. Go outdoors.
2. Move away from buildings and tall trees.
3. Make sure the face of the Cycle Trainer
4. Stand still until the satellite fix is obtained.

TAkE A rIDE

Start the timer in Speedometer mode to begin timing a ride. While the timer is
running, the Cycle Trainer computer records speed, distance, route, heart rate,
™
and other data.
1. Press START to begin timing.
2. While the timer is running, press
view ride data.
3. Press STOP to pause the timer and stop recording.
4. While the timer is stopped, press RESET, highlight YES, and press ENTER to
14
™ computer is pointed at the sky.
to cycle through the display screens to
reset the timer and save the ride.
5. Highlight CONFIRM?, then press ENTER.

rEvIEWING rIDES

Every time you reset the timer in Speedometer mode (and in the Trainer
Function, if you chose to record data), the ride is saved. You can view it from the
ACTIVITY INFO screens. Compare these saved rides against one another to track
your progress, or follow the routes of your favorite rides on the map.

ChooSING rIDES AND vIEWING DATA

View the list of rides from the ACTIVITY INFO screen, and select a ride to view
in more detail.
1. Press and hold ENTER to bring up the Main Menu. Highlight ACTIVITY, then
press ENTER.
2. Highlight ACTIVITY INFO, then press ENTER.
3. Highlight TRAINING INFO, then press ENTER.
15