Turn The Power On And Off; Set Display Units; Set Up Your User Profile - Timex Cycle Trainer 2.0 Schnellstartanleitung

TUrN ThE PoWEr oN AND oFF

Hold for about 2 seconds to turn the device on or off.

SET DISPlAy UNITS

Note: all of the following settings can also be done on your computer with
the Timex ® Device Agent. See "Installing the Device Agent" in the online User
Manual.
Choose the system of measurement in which your user, ride, and navigation
data will display.
You can display distance and weight units in ENGLISH, METRIC, or NAUTICAL
measurements.
You can display map coordinates as DEFAULT (degrees and minutes), GOOGLE
(degrees, minutes, and seconds), or UTM (x- and y- values of the Universal
Transverse Mercator system).
1. Press and hold ENTER to bring up the Main Menu. Highlight CONFIGURATION,
then press ENTER.
10
2. Highlight SET SYSTEM, then press ENTER.
3. Highlight DISPLAY, then press ENTER.
4. Highlight UNITS, then press ENTER.
5. Highlight the UNIT or COORDINATION field, then press ENTER.
6. Highlight the units to display, then press ENTER.

SET UP yoUr USEr ProFIlE

Enter your name, gender, birth date, height, and weight to ensure accurate
heart rate zone and calorie calculations.
1. Press and hold ENTER to bring up the Main Menu. Highlight
CONFIGURATION, then press ENTER.
2. Highlight USER PROFILE, then press ENTER.
3. Highlight the setting to change, then press ENTER.
4. Highlight a letter, number, gender, or month, then press ENTER.
11