Diagrams - Klein + Hummel Pro X Sub L Bedienungsanleitung

Klein + Hummel
Connection and Operation
The two drivers of the Pro X Sub L are wired in parallel to pins 2+/2- of the Neutrik NL4 connectors., giving a net
load impedance of 4 Ohms.
Pins 1+/1- on the Neutrik NL4 connector are wired as a simple pass through connection so that a single multicore
cable can be used to drive both the subwoofer and the top full range loudspeakers.
Connection Plate Pro X Sub L Connector Wiring

Diagrams

The outstanding acoustic performance of the Pro X Sub L is confirmed by technical measurement as shown in the
following diagram.
Free field frequency response Pro X Sub L with digital controller and full range top cabinet
Operating Manual Pro X Sub L English 2