Werbung
Verfügbare Sprachen
Verfügbare Sprachen
operation - Ventilation
WARNING:
Set the time switch to position 'OFF' before connecting the plug to the wall socket; this will make sure that
the appliance does not start immediately.
1. Put the fan on a level surface, with the grill facing the
direction in which you wish to ventilate.
2. Push the oscillation button if you wish the fan to oscillate.
Push out if you wish the fan to remain in a fixed direction.
3. Connect the plug to the wall socket.
4. Adjust the speed to the required level by pressing one of
the three speed buttons.
Speed 1 the fan operates at low speed.
Speed 2 the fan operates at normal speed.
Speed 3 the fan operates at high speed.
5. Set the timer switch to the required fan operating time. The
fan will automatically stop at the end of the set time. Switch
the timer switch to position 'ON' if you do not wish to use
the timer.
6. Stop the fan by turning the timer switch to position 'OFF'.
cleaninG anD maintenance
From time to time dust can accumulate in the fan housing, and on the fan blades. Remove the dust with a
brush and/or vacuum cleaner.
WARNING:
• Verify that the appliance is not connected to the power supply before you clean it.
•
Make sure no moisture gets into the appliance.
•
N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
0
100
25
STOP
OSCILLATION
1
2
3
ON
120
OFF
20
80
40
60
Figure 3
EN
Werbung
