operation - General
The appliance is intended
only for domestic use, not
for professional use.
1. Oscillation button
2. Speed buttons
3. Timer
4. Housing
5. Front Grill
6. Power cord and plug
operation - Before use for the first time
Remove the fan from the packaging and remove all packaging materials.
operation - assembling the foot
1. Slide the two halves of the foot into each other. Make sure that the fan's power cord runs through the
opening, with the plug at the bottom side of the foot.
2. Use the 3 crosshead screws to mount the foot to the bottom of the fan.
3. Place the power cord in the notch under the foot.
24
1
2
3
4
5
6
Figure 1
Figure 2
EN