Definitive Technology CS9080 Bedienungsanleitung Seite 7

Connecting Your Loudspeakers
STRIP 1/4" (6MM) WIRE
1. UNSCREW BOTTOM SET OF BINDING POST
AND CONNECT WIRE
2. TIGHTEN UNTIL SECURE
FIGURE 2 – Wiring and Polarity
1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/–
2. APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE
ENSURE THAT THE SPEAKER IS ALWAYS
CONNECTED TO THE RECEIVER OR AMPLIFIER +
TO + AND – TO –
7