Description And Indications Of The Leds - Absaar AB-MJS150 Benutzerhandbuch

EN

6. Description and indications of the LEDs

Description and
indication of the
"Power" power
supply button
Others
Indicator of the
Press the power supply button (6), the LED indicator (5)
charge status of
indicates the charge status of the internal battery. When
the internal
charging, the LEDs light up and flash one after the other until
fully charged. This is indicated when all the LEDs are lit.
battery.
The LEDs (5) indicate the charge status of the internal
Description of
battery in relation to the voltage of the internal battery
the charge
0%-25%
status levels
when
25%-50%
recharging the
50%-75%
internal battery
of the Mini
75%-99%
Jumpstarter.
100% (end of charging process)
Press the power supply button (6), the LED indicator (5)
indicates the charge status of the internal battery and
automatically switches itself off after 30 seconds if no
Description of
charge is
the charge
statuses when
100%-75%
recharging the
75%-50%
internal battery
of the Mini
50%-25%
Jumpstarter.
25%-1%
1%- 0%
0%
1- Double-click the "power" power supply button (6) to light
the torch (1).
2- Click again to activate the S.O.S. mode
Torch LED
3- Click again to activate the stroboscopic mode
lighting (1)
4- Click again (or double click) to switch off the torch (1).
The torch (1) cannot be switched on when charging the
battery or when the LEDs (5) indicate that the internal
battery's power is weak.
LED no. 1 flashes
LED no. 1 and no. 2 flash
LED no. 1, no. 2 and no. 3 flash
LED no. 1, no. 2, no. 3 and no. 4 flash
All the LEDs are lit continuously.
All the LEDs are lit.
LED no. 1, no. 2 and no. 3 are lit
LED no. 1 and no. 2 are lit
LED no. 1 is lit
LED no. 1 flashes
All the LEDs are off
8