Troubleshooting - Kärcher 2.642-533.0 Bedienungsanleitung

Cleaning the outlet
1 Tool storage box
2 Screw
3 Support
4 Drain pipe
Fault Possible cause
All coin acceptors Main switch is switched off.
reject all coins
Operating time or holidays set up wrong
A single coin ac- Coin acceptor dirty
ceptor rejects all
coins
Light exposure of coin acceptor.
Accessories
Appliance care
Lock grease
Order no. : 6.288-116.0
Steel care product
Order no. : 6.290-911.0
Wash hall and tile cleaner RM 841, 20 l
Order no. : 6.295-419.0
Squeegee
Order no. : 6.907-200.0
Spray bottle 1 l
Order no. : 6.394-374.0
RM Sprayer 5 l
6.394-255.0
Telescoping bar
Order no. : 6.999-023.0
Pad holder
6.999-080.0
White pads
6.999-046.0
Micro fibre cloth, blue
Order no. : 6.999-017.0
Lime solvent
RM 100 ASF
RM 101 ASF
10
 Unlock the lock and open the mainte-
nance door.
 Loosen the screw.
 Push holder to the side.
 Pull down drain pipe.
 Remove obstructions from the tool stor-
age chute and the drain pipe.

Troubleshooting

Malfunctions at coin mechanism
Remedy
Set main switch to "1".
Check the settings, operating time, holidays of
the system.
Clean the coin acceptor (see section „Mainte-
nance work")
Only test the coin acceptor while the remote con-
trol is closed.
4
-
EN
By whom
Operator
Operator
Operator
Operator