Technical Data Sheet - Auer Signal BEL-IP66 Montageanleitung

TECHNICAL DATA SHEET

This range of 6" bells has been designed for use in harsh environmental conditions to give
long and reliable service. They are ideally suited for heavy duty industrial & marine
applications. The unit produces a loud rich and clear traditional alarm bell sound free from
mechanical clatter.
Type Nominal
Voltage (V)
BEL 12 V DC
BEL 24 V DC
BEL 24 V DC
BEL 24 V AC
BEL 115 V AC
BEL 230 V AC
Key Features
• Terminals: single wire up to 2.5mm
fine wire up to 1.5mm
• Loop in & Loop out cabling option
• Ingress Protection: IP66
• Case Material: 30% glass filled polyamide nylon V-0 (UL94) FR & UV stable
• Gong Material: zinc coated mild steel, powder coated
• Duty Cycle: max: 10 mins ON – 30 mins OFF
• Operating Temperature: -25°C to +50°C
• AC Supply = 50 Hz
Maintenance
Under normal operating conditions the bell will be maintenance free.
However under very harsh environmental conditions it may be advisable, on occasion to
extract the solenoid striker and remove any debris built up, to ensure free movement of the
striker.
Due to the power of the solenoid and with heavy daily use the solenoid striker may
eventually penetrate through the wall of the gong. Three additional retaining slots have
been added to the gong to allow the gong to be rotated through 90° to offer a fresh striking
surface.
BEL V1.1
Gong Nominal
Colour Current (A)
Grey 0,845
Grey 0,470
Red 0,470
Grey 0,645
Grey 0,160
Grey 0,070
stripped 10-13mm
2
, stripped 10-13mm, attach end sleeve for strands
2
max.
dB
106 (Inrush Current ~21A)
106 (Inrush Current ~42A)
106 (Inrush Current ~42A)
106
106
106
Seite 10