Technical Specifications - Livall BH6X MT Series Anleitung

V. Considerations
1. The helmet contains electronic parts inside. Please do not take a long ride in the rain although the helmet can
prevent the rain from splashing.
2. After the helmet gets wet in the rain, the water droplets might occur in the chimney of tail LED lights. The water
droplets will disappear when you put the helmet under the ventilation environment for 1-2 days.
3. The helmet contains the battery of 3.7V/600mAh. The battery capacity varies with temperature change. The
battery life can decay when the helmet is used at low temperatures or below Zero degrees Celsius.
4. If the electronic functions do not work, please charge the helmet for 3 hours and then check if it works normally.
5. The helmet contains impact detection devices. Only if you connect your helmet with LIVALL APP, start ride mode
on the APP and your helmet suffers from the heavy impact, SOS alert feature can be triggered. Your emergency
contacts set on LIVALL APP can accordingly receive your SOS messages.
VI. Technical Specifications
Bluetooth : BT 4.1 + HFP/HSP/A2DP
Bluetooth distance : Max. 10 meters
Charging port : Magnet USB Charging cable
Electricity parameter : DC 5V/0.5A
Charging time : 3 hours
Battery life : The max. battery life of the light is 10 hours. Listening time for music
is 3-to-6 hours.
Standby duration: Max. 180 days
Temperature : Temperature for use: 0°C~40°C.
Recommended temperature for storage : -20~45°C
LIVALL Riding APP
LIVALL ON FACEBOOK
9