Changing The Purifying Filter; Technical Service - Bosch PAD 12000 Gebrauchsanweisung

Changing the
purifying filter

Technical Service

22
Important!
If the water tank is extracted during operation,
set the water stopcock to the position indicated
in fig. 11 to prevent any water from dripping
onto the base of the appliance.
The appliance is supplied with a basic air filter
joined to the air inlet grille. This filter needs to be
cleaned when the appliance has been in operation
for a long period of time, Fig. 13. To clean the filter,
flush it under a running tap, dry and replace.
Warning!
Do not try to clean the basic filter in a
dishwasher. The plastic the basic filter is made
of is unable to withstand the high temperatures
involved in washing programmes and may
deform.
20-litre models also have a double-active purifying
filter which should be changed at least once a year.
You can purchase a new filter from your high street
outlet or our Technical Services Network under the
reference:
Double Filter B1REZ12000
To change the filter, dismantle the filter and the
cover which protects it, extracting them as shown
in figures 13 and 14. Reassemble by following the
same procedure in reverse order.
Should your appliance fail to work properly and all
the instructions for use and installation (especially
the section headed "Things that can save you
from making unnecessary phone calls") have
been carefully observed, then remember that our
Technical Service Network is at your full disposal.
When contacting the Technical Service, quote the
model code (E-NR) and the appliance's factory
number (FD). This information can be found on the
characteristics plate.