Connecting A Drive; Wt, Rts, Io Drives: Universal Setting Cable Kit 9015971 (Or 9016772 For Switzerland ); Kit 9020579; Technical Data - SOMFY io HYBRID Setting Cable Kit io HYBRID Setting Cable Kit Anleitung

4. CONNECTING A DRIVE

4.1. WT, RTS, io DRIVES:
Connect the drive directly (with the Hirschmann plug) Ž or by the adapter cable (9020148)
 contained in the kit.
▼
DOWN-movement (black)
When connecting a
radio drive (RTS/io), this
terminal remains blank!!
▲
UP-movement (red)
N
Neutral wire (blue)
Earth wire (green/yellow)
4.2. io HYBRID DRIVES:
Connect the drive by the adapter cable .
▼
DOWN-movement (black)
When connecting a
radio drive (RTS/io), this
terminal remains blank!!
▲
UP-movement (red)
L
Live wire (grey)
N
Neutral wire (blue)
Earth wire (green/yellow)

5. TECHNICAL DATA

Supply voltage:
Output voltage:
Current output:
Safety level:
SOMFY hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the
European Directives applicable to the European Union.
A declaration of conformity is available at www.somfy.com/ce.
Copyright © 2010 - 2017 Somfy SAS. All rights reserved.
Universal Setting Cable Kit 9015971 (or 9016772 for Switzerland )

io HYBRID Setting Cable Kit 9020579

220-240 V AC 50 Hz
220-240 V AC 50 Hz
max. 4 A
Category I
Protection rating:
Operating temperature:
Measurements (W x H x D):
Environmental conditions:
Images non contractuelles.
EN
Ž
IP 40
- 10°C to + 50°C
7 x 3 x 14 cm
Dry rooms
9