Emgeton C3 PRO Anleitung Seite 12

LEARNING
The feature is used to supplement the preprogrammed code list.
1. Press device key to select the device (e.g. DVD) to learn.
2. Press and hold the SET key on your remote control for more than 3 seconds, then
release it.
3. Press the or
select "LEARNING" of the LCD menu, then "Select Key", (e.g. Power), confirm by OK
key.
4. LCD shows "PLS Send Signal", point the transmitter of the original remote control
remotes face to the receiver window of this universal remote control by approximately
50mm apart. Press and hold the original remote key (e.g. Power) until the LCD displays
"Success!".
SET UP CLOCK
You can set up the clock on your remote control and the time will be displayed
1. Press and hold the SET key on your remote control for more than 3 seconds, then
release it.
2. Press the or
3. Press the or
Day, Hour and Minute, then press the w or w key to change the year, month, date, day,
AM or PM, hour and minute.
4. LCD shows "Success!", this finishes the set-up
VOLUME LEVEL LOCK
This function makes it very convenient when you only use one device to adjust volume.
For example, you may use your amplifier as your main volume control, then you can
use this function to fix the volume and mute key of AUX, no matter which device you will
use (even you will use TV, DVD, VCR etc), the volume and mute key on remote control
still control the volume and mute of your amplifier.
1. Press and hold the SET key on your remote control for more than 3 seconds, then
release it.
2. Press the or
3. Press the or
4. Press DEVICE key to select the device (e.g. AUX).
5. Press the or
6. LCD shows "Success!", this finishes the set-up
keys to select "SetupCode" on LCD menu, then press OK key,
keys to select "TimeSet" on LCD menu, confirm by OK key.
key to select desired setup items such as Year, Month, Date,
keys to select "OtherSet" on LCD menu, confirm by OK key.
keys to select "VOL Lock" on LCD menu, confirm by OK key.
key to change to the Locked or Unlock mode.
12