IKRA Mogatec LSN 2600 E Gebrauchsanweisung Seite 21

and knowledge. Children should be supervised
to ensure that they do not play with the product.
• Cleaning and maintenance may not be carried
out by children.
• Never allow children or people unfamiliar with
the instructions to use the machine.
• Have your dealer or a specialist show you how
to operate your trimmer.
• Local regulations may restrict the age of the
operator.
• Before use, examine the cable for signs of dam-
age, or ageing. Do not use the product if the
electric cables are damaged or worn.
• Arrange the extension cord so that it cannot be
damaged and does not cause a hindrance.
• If the cord is damaged during utilisation, it must
be disconnected immediately from the mains.
DO NOT TOUCH THE CORD BEFORE IT IS
DISCONNECTED FROM THE MAINS.
• Make sure to have a safe stand when working
on inclines.
• Move the tool at walking speed only.
• Inspect the collection bag regularly. If the collec-
tion bag becomes worn or damaged, replace.
• The wearing of a face mask for protection from
dust is recommended.
• It is recommended that the device is only op-
erated at reasonable times of the day - so not
early in the morning or late in the evening - when
people could be disturbed by this.
• It is recommended to loosen debris with rakes
and brushes first and only then to start with the
blowing or vacuuming.
• It is recommended that dusty surfaces be lightly
dampened or that a mister is used.
• It is recommended to work with the full blast
tube length so that the air flow can work close
to the ground.
• Never operate the device with faulty coverings or
safety devices or with safety devices missing -
the attached debris bag for example.
• Only use weather-resistant extension cables
with sockets and plugs that comply with the IEC
standard 60320-2-3.
• Ensure that all nuts, bolts and screws are firmly
tightened so that the device is constantly in a
safe working condition.
• Replace parts that are worn out or damaged.
Remove the plug from the mains supply
• Before leaving the Vac-Blower unattended for
period;
• Before clearing any blockage;
• Before checking, cleaning or carrying out any
work.
• If a foreign body, or other debris, is accidentally
feed into the Vac-Blower, stop it immediately
and do not use the Vac-Blower until it has been
checked and you are sure that the entire Vac-
Blower is in a safe operating condition.
• If the Vac-Blower makes any unusual noise or
starts to vibrate abnormally STOP immediately
remove the plug from the mains supply and
investigate the cause. Excessive vibration can
cause damage to the Vac-Blower and injury to
the operator.
• The device should be operated via a residual
current circuit breaker (RCD) with a triggering
current of max. 30 mA.
• Extension cords/leads should only be used if
they comply with H05W-F, H05RN-F types or
IEC type design (60227 IEC 53, 60245 IEC 57).
GB-5