Auma 10031954 Handbuch Seite 18

EN
18
RADIO OPERATION
1. Power the unit ON if STANDBY mode by pressing the STANDBY ON/OFF
button
The default mode is RADIO, if the unit was already ON, and in CD mode,
you will need to press the SOURCE button to switch to the RADIO mode.
2. Set the band to either AM or FM by pressing the PLAY/PAUSE/BAND
button while in RADIO mode.
3. To tune a station press either REV/TUN- or FWD/TUN+ buttons to skip
up or down the frequency range. Press and hold either button to fast
search up or down the frequency range. When a station is found the
search will stop and the station will begin playback.
4. Use the AL 1/VOL- or AL 2/VOL+ buttons to adjust the volume level.
NOTE: To improve FM reception you can relocate the antenna cable. To
improve AM reception the unit will need relocating to an area with better
reception.
Storing recalling presets
You can store up to 10 preset radio stations per radio band.
1. While listening to a tuned radio station, press and hold the STOP/
PRESET button to display the preset location option. Use the REV/TUN-&
FWD/TUN+ buttons to cycle through the available preset location 1-10.
2. When the location is selected press the STOP/PRESET button once more
to store the current station in the selected preset location.
3. To recall a preset station press the STOP/PRESET button, use the
REV/TUN-&FWD/TUN+ buttons to cycle through the available preset
locations 1-10.When the correct location is selected leave all buttons
untouched for 2 seconds to begin playback.
BASIC CD OPERATION
1. Power the unit ON if STANDBY mode by pressing the STANDBY ON/
OFF. The default mode is RADIO so press the SOURCE button to switch
to the CD mode.
2. Open the CD door by pressing the OPEN/CLOSE door release button.
Inset a CD with the label facing upwards and close the door.
3. The unit will read the disc and display the total number of tracks found
on the disc on the display
4. To begin playback press the PLAY/PAUSE/BAND button. The first track
on the disc will play.
5. To pause playback press the PLAY/PAUSE/BAND button once more.
Pressing again resumes playback