Operational Instructions; Safety Instructions; Features - Zeck Audio VECTOR T3A Bedienungsanleitung

Operational instructions

Attention!
In certain applications, this unit is able to produce extremely high sound pressure levels that might lead to permanent ear
damage. Never expose persons to sound pressure levels that they feel unconfortable with. If you experience an
unpleasant or dull feeling in your ears or suffer from hearing loss or ringing noise, contact a physician as soon as possible.

1. Safety instructions

1. Before using the VECTOR T3A, study the instructions in this manual carefully.
2. All safety instructions in this manual and on the cabinet have to be strictly followed.
3. Never use the VECTOR T3A near water or in a humid environment, e.g. near washbasins, bath tubs, swimming pools or in
damp rooms.
4. Never use the VECTOR T3A near heat sources (e.g. radiators) or in intense sunlight.
5. Environments where the VECTOR T3A is exposed to dust or vibrations should be avoided.
6. Do not allow objects or liquids to enter the cabinet.
7. For protection against electric shock, use only mains sockets that are absolutely proof against protruding contacts.
8. The VECTOR T3A must always be used with functioning protective earth. Never defeat or manipulate the protective earth
means of the VECTOR T3A.
9. Always run the mains cable so that any danger of damage, e.g. by pinching objects, is absolutely excluded. In
particular, protect both ends of the mains cable entering the mains plugs against excessive tension.
10. Do not place the VECTOR T3A on surfaces that are tilted and/or unstable.
11. As a user, do not attempt to service the VECTOR T3A. Leave all repair work to qualified personell. Zeck is nor liable for
any damage as a result of unauthorized service performance.
12. Keep the entire instruction manual for future reference.

2. Features

- Active 2-way bass reflex cabinet
- 60W Class-AB power amplifier for 1" driver
- 300W Class-D digital power amplifier for 12" bass speaker
- Automatic power limiter with speaker modelling algorithm for both
amplifiers
- 1.8 kHz crossover frequency
- Balanced XLR inputs and outputs
- Mic/Line selecter switch for input
- Stereo insert jack, also for system inter connection
- Volume control
- Bass-Enhance control
- Mains power switch
- Mains power connector
- High-stand adaptor socket with locking screw
- Cabinet shape designed to allow floor-monitor positioning
- Integrated M10 thread for use with Zeck mounting accessory
(available on request)
8 owner´s manual VECTOR T3A © Zeck Audio
VECTOR T3A