Specification
Video input:1 S-video input and RCA type composite video input
Video system supported: NTSC, PAL and SECAM
Audio go through line in of Pc' s sound card
Power Consumption: 5VDC, 250mA(max) through USB port LED for Power indicator
Dimension: 80mm x 30mm x 15mm
Minimum System Requirement
Preview Mode display (no recording) P 1GHz
Full Dimension MPEG2 – P -2.0GHz or above 640 x 480 MPEG2 – P -1.7GHz or above 128MB of
RAM (256MB prefer)
Windows XP/2000 for USB2.0
Sound card
Package Checklist
Check and identify the supplied items as below before operating this machine. If finding any shortage or
damage, please contact your dealer as soon as possible.
Software Utility Disc
Audio Cable
Software Utilities
You have to install the Grab Show 110 driver so that you can configure the system of Grab Show 110. Please
follow the steps as below to finish the installation of Grab Show 110 driver.