vigo EHR5012 Bedienungsanleitung Seite 11

EN
2.2 Chromated Model
1. Open the packing box and take out the radiator with its
protective nylon cover. Tear the protective nylon cover outside
the box without giving any harm to the appliance and take out
the assembly unit.
2. Correct space has to be measured in order that the
connection cord can easily be connected to the electric socket.
After determination of the installation area, the holes must be
marked according to the method shown in Figure 6.
3. After marking the points according to Figure 6, the holes
will be drilled by a Ø10 mm drill and the plastic dowels (see
figure 5 -part "1") that are in the installation items are inserted
to these holes.
4. Attach the anchors (4 pieces) (see figure 5 - part"2") onto
plastic dowels with the washer (see figure 5 -part "3") and the
screw (see figure 5 - part "4").
5. Then you will fix your towel warmer on the wall with
assembly parts 5, 6, 7, 8, 9, 10 as its shown in figure 6.
Note: Protect the control unit against impacts and crashes
during installation.
Ø6 x 150 mm
11