Batavus ION Bedienungsanleitung Seite 55

1.3.4 Peddling assistance
You can switch on the system by pressing the up arrow on the lights
button. When the E-bike is not being used, the peddling assistance and
lights will be switched off automatically after five minutes. The display will
be put in the sleep mode automatically after another five minutes and the
display will no longer be shown.
Press the up arrow on the lights button to cancel the sleep mode. The
sleep mode of the display will also be cancelled when the bicycle is again
in motion.
1.3.5 Diagnosis report
If all LEDs flash, first check whether the
battery pack (A) has been correctly
connected to the docking station (B).
If the LEDs continue to flash, contact your
dealer.
1.3.6 Lighting
The lights (both at the front and rear) are supplied with electricity by the
battery pack and will, therefore, only work when the battery pack has been
installed in the E-bike. The motor will work as a dynamo when the battery
pack is flat. The rear light is fixed to the battery pack.
If the rear light needs to be replaced, we recommend contacting your
certified E-bike dealer.
54
52