nedis BTRC100BK Anleitung Seite 2

Product view
3.5 mm male to male
Audio R/L
Audio amplifier
Analogue connection
1. Connect the 3.5 mm audio cable connector (incl.) to the headphone socket
of the BTRC100BK.
2. Connect the second audio cable connector to the input of your audio
system or amplifier. (Refer to the manual of the device).
3. Connect the USB cable to the BTRC100BK and to a USB port on your audio
system to power the BTRC100BK. You can also use a USB power adapter
(optional).
4. The LED flashes to indicate that the unit is powered and ready to be paired
with your device(s).
Pairing the BTRC100BK
To pair you smartphone or tablet with a Bluetooth® enabled device, check the
device manual.
The BTRC100BK has a capacity to store up to 8 devices so you only have to
enter your PIN once.
Reconnecting your device
If you move out of range or turn off the Bluetooth® feature on your device, you
can easily reconnect by opening the Bluetooth® manager and tap the "music
receiver".
Power via adapter (optional)
Power via USB port of your device
2
ENGLISH