Controls And Functions - Eizo CG241W Installationshandbuch

Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged,
contact your local dealer.
NOTE
Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Power cord
• Digital signal cable (FD-C39)
• Analog signal cable (FD-C16)
• EIZO USB cable (MD-C93)
• Hood
• Mounting Screws (M4 x 12, 4 pcs)
• Cleaning kit "ScreenCleaner"

Controls and Functions

Adjustment menu
(ScreenManager )
® *
1 Sensor
2 Adjustment Lock button
3 Input Signal Selection
button
4 Mode button
5 Auto button
6 Enter button
7 Control buttons
(Left, Down, Up, Right)
8 Power button
9 Power indicator
10 Security lock slot
11 Power connector
12 Input signal connectors
13 USB port (Up)
14 USB port (Down)
15 Stand
16 Cable holder
®
* ScreenManager is an EIZO's nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User's Manual on the CD-ROM.)

• EIZO LCD Utility Disk (CD-ROM)
- Calibration software "ColorNavigator"
- User's Manual
• Setup Manual (this manual)
• ColorNavigator Quick Reference
• Limited warranty
• Recycling Information
• Adjustment Certificate
Detects ambient brightness. BrightRegulator function.
Refer to the User's Manual on the CD-ROM.
This function locks the buttons to retain the status adjusted or set once.
Switches input signals for display when two PCs are connected to the monitor.
Allows you to switch the display mode.
Performs the function to adjust the screen automatically. (analog input only)
Displays the Adjustment menu, determines an item on the menu screen, and saves
values adjusted.
Chooses an adjustment item or increases/decreases adjusted values for advanced
adjustments using the Adjustment menu.
Turns the power on or off.
Indicates monitor's operation status.
Blue: Operating Orange: Power saving Off: Power off
Flashing blue (2 times for each): When the timer is set for ColorNavigator, notifies that
a recalibration is required (for CAL mode or EMU mode).
Complies with Kensington's MicroSaver security system.
Connects the power connector.
DVI-I Connector x 2
Connects the USB cable in order to use the provided software. For how to use it, refer
to the User's Manual on the CD-ROM.
Connects a peripheral USB device.
Used to adjust the height and angle of the monitor screen.
Covers the monitor cables.