Receiver - ANT START 16 BHS Bedienungsanleitung

2.1 | RECEIVER - START 16R
1 POWER
Press this button on receiver front panel for 1" to turn ON/OFF the unit.
2 AF LEVEL METER
It shows the audio signal level. Avoid that the red LED (the rightmost one)
remains lit continuously.
3 ASC
Press this button to achieve automatic channel (frequency) synchronization
via infrared.
4 IR WINDOW
It allows the synchronization of the channel (frequency) with the transmitter.
After pressing the ASC button, place the handheld microphone or beltpack
transmitter close to this window and wait for the selected channel to stop
flashing on the display. After the synchronization, the receiver's display
is lit steadily on the selected channel (frequency).
5 DISPLAY
It shows the number of the activated channel.
6 UP
Press this button to scroll and select channel number in ascending mode
from 01 to 16.
7 DOWN
Press this button to scroll and select channel number in descending mode
from 16 to 01.
8 ANTENNA A
This LED turns on automatically when the unit is receiving a better signal
from the antenna A.
9 ANTENNA B
This LED turns on automatically when the unit is receiving a better signal
from the antenna B.
10 VOLUME
It adjusts the output audio level.
11 ANTENNAS
For the best signal reception, please place the antennas in a vertical position.
START 16 Series
| User manual
5