Safety Notes; Safety Warnings; General Notes; Function - Märklin 80 Series Bedienungsanleitung

2. Safety Notes

• This locomotive is to be used only with an operating system designed for it
(DC power = 18V±, Märklin AC, Märklin Delta, Märklin Digital,
Märklin Systems).
• Use only switched mode power supply units and transformers that are
designed for your local power system.
• This locomotive must never be supplied with power from more than one
transformer.
• Pay close attention to the safety Notes in the instructions for your operat-
ing system.
• Do not expose the model to direct sunlight, extreme changes in tempera-
ture, or high humidity.

3. General Notes

• locomotive in this set is set for address 80 for operation with other controllers.
• The feeder track must be equipped to prevent interference with radio and
television reception, when the locomotive is to be run in conventional opera-
tion. The 104 770 interference suppression set is to be used for this purpose.
The interference suppression set may not be used for digital operation.
• The operating instructions are a component part of the product and must
therefore be kept in a safe place as well as included with the product, if the
latter is given to someone else.
• Please see your authorized Märklin dealer for repairs or spare parts.
• http://www.maerklin.com/en/imprint.html
No warranty or damage claims shall be accepted in those cases where parts neither
manufactured nor approved by Märklin have been installed in Märklin products or where
Märklin products have been converted in such a way that the non-Märklin parts or the
conversion were causal to the defects and / or damage arising. The burden of presenting
evidence and the burden of proof thereof, that the installation of non-Märklin parts or
the conversion in or of Märklin products was not causal to the defects and / or damage
arising, is borne by the person and / or company responsible for the installation and / or
conversion, or by the customer.

4. Function

This locomotive has a built-in multi-train electronic circuit and offers these
features:
• The mode of operation is automatically recognized.
• Mfx technology for the Mobile Station / Central Station.
Name set at factory: BR 80 038
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Volume can be changed for the sound effects.
• Setting the locomotive parameters electronically with the Control Unit,
Mobile Station or Central Station.
• Built-in sound effects circuit, can only be used in operation with
Märklin Digital or Märklin Systems.
• Additional sound effects that can be controlled.
• The model is designed for operation on Märklin 1 Gauge track. As the
consumer you assume the risk for operating on other makes of track.
• Minimum radius for operation: 600 mm / 23,6-7/8".
• Headlights, changing over with the direction of travel.
• Only the train control functions and headlight changeover feature are avail-
able in analog operation.
The maintenance work necessary with normal operation of this locomotive is
described below.
6