Mounting And Installation - CACHPejse CACH Gebrauchsanleitung Und Sicherheitshinweise

ENGLISH
User manual and safety instructions for CACH ethanol
fireplaces and burners.
Be sure to keep this user guide as long as the product is in your possession. If
the product is resold the user guide must be included.
Bioethanol Fireplaces should ONLY be operated by responsible adults that have read and under-
stood the safety instructions and guidelines in this user guide.
IMPORTANT
• CACH Ethanol Fireplaces are for decorative purpose only and are not recommended as a
primary heating source. Review local legislation before use.
• Bioethanol is a hazardous substance at hazard level 3 according to UN 1987.
• Be sure to check national and / or regional regulations for safe storage of fuel.
• The use of CACH fireplaces for various purposes or as an open fireplace where flammable
liquids or materials are used is not permitted.
• Manual operated ethanol fireplaces are extinguished with the flame snuffer.
• Automatic remote controlled ethanol fireplaces are extinguished using the remote-control or
control panel.
• Do not overfill the ethanol burner – spillage of bioethanol can lead to flames spreading and
becoming uncontrollable.
• Bioethanol spillage must be removed before fireplace ignition.
• The design of the ethanol burner must not be altered.
• NEVER refill bioethanol when the ethanol fireplace is in use or when the ethanol burner is still
hot. Risk of explosion!
• The flames should never touch the inside of the insert.
• Avoid physical contact with bioethanol.
• Children must never be allowed to operate the ethanol fireplace
• People under the influence of alcohol, drugs or medication, or persons who are physically or
mentally weakened must not operate the ethanol fireplace.
• Children and pets must always remain at a safe distance of the ethanol fireplace.
• The outer surface may become hot during use. Adequate attention is required when handling.
• Take extra care if you are wearing flammable clothing or if you have long hair.
• Do not blow air into the fire.
• Never leave an ignited burner unattended.
• Avoid placing flammable material, e.g. Paper, cardboard, fabric (clothes), etc. on, or around the
ethanol fireplace and burner.
• Keep the opening of the ethanol burner closed when the appliance is not in use.
• Any use of an ethanol burner for burning anything but approved bioethanol is prohibited.
• Only use bioethanol with an alcohol percentage of at least 96% alcohol, but not more than
97,5% alcohol. We recommend our own bioethanol with an alcohol percentage of 96,6%
alcohol.
• It is recommended to have a fire extinguisher or a fire blanket with in reach.
• Not suitable for continual use.
• Maintain a minimum safety clearance of 50 cm for combustible materials and at least 1 meter
for curtains.
2
It is recommended to have It is recommended to have
easy access to a fire blanket easy access fire extinguisher
Read instructions before Only use approved fuel as
installation and use outlined within the user

MOUNTING AND INSTALLATION

General rules for installation
• A minimum of two people is recommended to mount and install the fireplace.
• Make sure that the wall / table / floor where the ethanol fireplace and burner is to be placed
are heat resistant and capable of bearing the weight of the fireplace.
• Ensure that the bio fireplace is levelled, both horizontally and vertically. This ensures that no
liquid will overflow the ethanol burner.
• Maintain a 1-meter clearance to other flammable items. Keep flammable items (e.g. curtains,
furniture, or bookshelves) away from the fireplace.
• Do not place flammable objects on top of the appliance.
• Avoid placing the fireplace next to, under or on a window sill.
• To minimise presence of soot, keep the fireplace in a draft free room. It is however important
to keep the fireplace in a well-ventilated space.
Installing a wall-mounted bioethanol fireplace
It is important to use the enclosed mounting bracket as it creates a safety clearance between the
wall and the fireplace which ensures a natural airflow. The fittings may vary slightly depending on the
fireplace model.
Course of action:
1. Install the top bracket first. It is recommended to screw it into the posts in the wall. If there are
no posts, gypsum wall dowels may be used to mount the bracket. Make sure the fitting is level-
led. Drill a hole in the wall. Insert dowels into the holes and screw the bracket to the wall.
2. If there are vertical brackets for your fireplace, they should be fitted now. Hang them on the
horizontal bracket. You need to make sure that they are hanging levelled and mark where to
drill. Drill holes in the wall and then tighten the vertical brackets to the wall.
3. The fireplace is ready to be hung on the wall. Make sure that the holes on the back of the fire-
Designed for home
decoration only
May only be used in a
ventilated room
manual
3