Installation; Connection Locations; Wiring Connections - ZENEC ZE-TVA Bedienungsanleitung

INSTALLATION

CONNECTOR LOCATIONS

CONNECTION LOCATIONS

ttx005 manual.qxd
1. Power inputs
2. Audio outputs
3. Video output
1. Power Inputs
4. IR-Sensor
2. Audio Outputs
5. TV antenna inputs
3. Video Output

WIRING CONNECTIONS

WIRING CONNECTIONS 4. IR Remote Eye Input
5. TV Antenna Inputs
WIRING PRECAUTIONS
Read all wiring precautions. If you are not sure of the connections,
contact your authorized Clarion Dealer.
1. Disconnect the negative(-) lead of the battery before making any
power connections.
2. When creating passage holes for the power wires, use grommets to
eliminate any sharp edges created during drilling. This will protect
the wire from being nicked and causing a short circuit.
3. When connecting the ground lead, fasten the ground lead (black)
securely to a clean metal plate on the vehicle.
3
8/11/2005 3:17 PM Page 5
15
English