Replacing The Batteries; Bluetooth Pairing - Konig CSBTSPTWR100BL Bedienungsanleitung

CSBTSPTWR100BL
Wireless tower speaker
Description
Front panel (fig. A1)
1. Display
2. On/off button
Play/pause button
3. Volume + button
Next button
4. Volume - button
Previous button
5. Mode button
6. Scan button
Sleep button
Rear panel (fig. A2)
7. USB output
8. DC input
9. Audio input
10. FM-antenna
Remote control (fig. B)
11. On/standby button
12. Play/pause button
13. Mute button
14. Volume + button
15. Volume - button
16. Next button
• Press and hold the button
to switch on or off the
device.
• Press the button to start or
pause the audio playback.
• Press and hold the button
to increase the volume.
• Press the button to play the
next track.
• Press and hold the button
to decrease the volume.
• Press the button to play the
previous track.
• Press the button to set
the source: FM / AUX /
Bluetooth.
• FM mode: Press and hold
the button to search FM
channels automatically.
• Press the button to enter
sleep mode: Off, 30, 60, 90,
120 minutes.
• 5V 2A
• Connect the power adapter
to the DC input.
• Connect the mains cable to
the mains.
• FM: Connect an RCA cable
to the audio input.
• AUX: Connect an audio
device to the audio input
using an auxiliary cable.
• Press the button to switch
on the device or set the
device to standby mode.
• Press the button to start or
pause the audio playback.
• Press the button to mute or
unmute the sound.
• Press the button to increase
the volume.
• Press the button to
decrease the volume.
• Press the button to play the
next track.
3 3
17. Previous button
18. FM button
19. AUX button
20. Bluetooth button
21. Scan button
Sleep button
22. Search + button
Search - button
23. Reset button
Installation (fig. C)
• Refer to the illustration to install the device.

Replacing the batteries

The remote control is powered with one lithium
battery (CR2032).
• Open the battery compartment.
• Insert the battery into the battery compartment.
• Close the battery compartment.

Bluetooth pairing

1. Switch on the device.
2. Set the source to Bluetooth.
3. Activate Bluetooth on your Bluetooth device.
4. Search for new devices on the Bluetooth
device.
5. Select the device: "CSBTSPTWR100BL".
If necessary, confirm with the PIN: "0000".
The Bluetooth device will confirm when the
pairing is completed.
English
• Press the button to play the
previous track.
• Press the button to set the
source to FM.
• Press the button to set the
source to audio input.
• Press the button to set the
source to Bluetooth.
• FM mode: Press and hold
the button to search FM
channels automatically.
• Press the button to enter
sleep mode: Off, 30, 60, 90,
120 minutes.
• FM mode: Press and hold
one of the buttons to enter
manual channel search
mode.
• FM mode: Press and hold
the buttons to search FM
channels manually.
• Press the button to reset
the device to the default
settings.