Safety Instructions - Johansson Profiler Lite 6601 Bedienungsanleitung

SAFETY INSTRUCTIONS

Read carefully these instructions before connecting the unit.
The operating voltage is indicated on the adapter.
To prevent fire, short circuit, shock hazard:
Do not expose the unit to rain or moisture.
Install the unit in a dry location without infiltration or condensation of water.
Do not expose it to dripping or splashing.
Do not place objects filled with liquids, such as vases, on the apparatus.
If any liquid should accidentally fall into the cabinet, disconnect the power plug.
Refer to qualified technician before it's further operation.
To avoid any risk of overheating:
Install the unit in a well aery location and keep a minimum distance of 15 cm around the apparatus for
sufficient ventilation.
Do not place any items such as newspapers, table-cloths, curtains ... on the unit that might cover the ventilation holes.
The unit must not be exposed to any source of heat (sun, heater,...).
Do not place any naked flame sources, such as lighted candles, on the apparatus.
Do not install the product in a dusty place.
Pull out power plug to make the different connections of cables.
To avoid electrical shock, do not open the housing of adapter.
Cleaning :
Only use a dry soft cloth to clean the cabinet. Do not use solvent.
Servicing :
For repairing and servicing refer to qualified personnel.
Mounting
(4)
(5)
(2)
(3)
(5)
15 cm.
212.5 mm.
B I-II B III UHF1 UHF2
24V 24V
I-II III 1 2 3 4 5 6 7
UHF Clusters
R
MULTI CHANNEL
PROGRAMMABLE FILTER-AMPLIFIER
Ref.: 6601
Stop Channel Manual Level
Start Channel Auto Level
Select Filter Data Import
Split UHF Exit
+
15V IN
Output
Test
(-30 dB)
B I-II B III UHF1 UHF2 UHF3
24V 24V 24V
I-II III 1 2 3 4 5 6 7 8 9 10
UHF Clusters
GND
R
15 cm.
MULTI CHANNEL
PROGRAMMABLE FILTER-AMPLIFIER
Digital
Terrestrial
Ref.: 6601
Stop Channel Manual Level
Start Channel Auto Level
Select Filter Data Import
Split UHF Exit
+
15V IN
Output
Test
(-30 dB)
UHF3
24V
8 9 10
(1)
GND
Digital
Terrestrial
Leave a minimum space of 15 cm.
around the product to guarantee
a maximum ventilation.
5
(1) Earthing
(2) Place the adapter in its holder
(3) Connect the power supply
to the amplifier
(4) Plug the mains cable to the adapter
(5) Click the adapter holder to
the amplifier