Before Use - aidapt VG832 Aufbau- Und Wartungsanleitung

INTRODUCTION
Thank you for deciding to purchase the Canterbury Mobile Multi-Table from Aidapt.
This product is manufactured from the finest material and components and, when
used and maintained correctly, is designed to give many years of reliable trouble-
free service.
NB. This equipment must be installed by a competent person.
VG832 Self Assembly
VG866 Fully Assembled
15 kg weight limit.
Do not exceed the weight limit stated – doing so could damage the equipment
or put the user at risk.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
CONTENTS
Wood finished table top with integrated chrome plated tubes
•
Painted tubular 'H' section with black threaded locking nuts x 2
•
Stainless Steel 'L' shaped brackets
•
U-shaped base with two short uprights
•
'E'-clips x 2
•
ASSEMBLY INSTRUCTIONS
1. Carefully unpack your Canterbury Table and examine all parts for any
damaged or, loose fitments. Should you find any fault, please return your
table to your supplier for exchange.
2. After inspection, place the wooden finished table-top face down onto a
soft surface to avoid scratches and raise both the fixed chrome plated
tubes vertically and level.
3. Take the two painted tubular sections with the black threaded locking nuts
attached and slide these OVER each of the chrome plated tubes with the
black locking-nuts facing downward towards the table top. Tighten the
threaded nuts onto the chrome plated tube.
Fixing and Maintenance Instructions
2
Ver. 4 01/2013 (1327)