Before Use; Intended Use - aidapt VG824D Gebrauchs- Und Wartungsanleitung

INTRODUCTION
Thank you for deciding to purchase the Adjustable Bed Raiser Unit from Aidapt. The
Adjustable Bed Raiser Unit is manufactured from the finest materials available.
When used correctly it is designed to give many years of reliable, trouble-free
service.
NB. This equipment must be installed by a competent person.
VG824D Bed raiser maximum 57½" width
VG824S Short with 35" maximum width.
Maximum User Weight: 318 kg (50 stone) including furniture.
Do not exceed the weight limit stated – doing so could put the user at risk.

BEFORE USE

Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.

INTENDED USE

The adjustable bed raiser is specifically designed for beds with legs. The base has
been elongated to improve the size of its foot print and give much greater stability.
Each unit is linked across the width of the bed to provide greater strength.
The raise can be altered through the use of insert blocks under the bed leg giving
three different height adjustments. Bed legs up to 2¾" square can be fitted into the
raiser further increasing the versatility of this product.
Two versions are available; one for single and one for double beds.
Usage and Maintenance Instructions
2
Ver. 2 07/2012 (2110)