Topmark XAVI T6080 Gebrauchsanleitung Seite 31

11. Use a screwdriver to take the screws out of the battery cover, and take the
battery cover out. Put batteries into the battery compartment according to the
correct polarity, then put the battery cover back and fasten it. Use the same way to
take out battery.
3. Adjust battery
to flat position.
ASSEMBLING
2
1
1.First,put negative side
of 1.5V battery into the
battery compartment
with the spring.
4. Close battery cover，
lock the screws tightly.
31
2.Then, put the positive side
of 1.5V batteryinto the battery
compartment with the mark +
3
EN