Pix-Star FotoConnect XD Benutzerhandbuch Seite 6

4. Wi-Fi and Internet Setup
4.1 Connect the device to a Wi-Fi wireless network
Each device has a dedicated email address, which makes it possible for the device to receive
pictures directly from the Internet. To receive pictures, the device must be connected to the
Internet through a Wi-Fi gateway.
Here is how to connect your photo frame to a local Wi-Fi network:
First access the Main menu (quit the slide show if necessary). Scroll to Settings and press Menu or
" " this will enter the Settings menu. Then scroll to Wi-Fi settings and press " ".
The device will automatically start a scanning process to discover available wireless networks.
Using the UP and DOWN keys navigate the interface to select the Wi-Fi network you want to
connect to. Once selected just press the button to connect to this network.
If the network has its security enabled, the device will automatically pop up a window where you
can enter the security key. All other parameters are AUTOMATICALLY configured by your Pix-Star.
Note: A DHCP server must be running on your network in order to automatically assign an IP address
to your device. Most personal Wi-Fi networks run a DHCP server.
5