Troubleshooting - VIETA VH-CD041 Benutzerhandbuch

Troubleshooting

PROBLEM
No power when CD Player or Receiver
is turned on
No sound
The unit does not read the disc
The unit skips some parts
during playback
A buzzing can be heard
There is sound in one channel only
High buzzing
Weak bass and poor stereo
perspective
32
SOLUTION
- Switch on the power at the socket.
- Check if the plug has been correctly inserted into the
socket.
- Check if the internal fuse has blown and must be
replaced by qualified service technician.
- Check the power cord has not been damaged, if so it
must be replaced.
- The CD Player or Receiver unit has not been turned on.
- CD Player is incorrectly connected to Receiver.
- No CD in the unit; or no song files in the USB memory.
- The volume control is set to minimum in Receiver.
- The speaker cables have not been correctly connected
to the receiver.
- A wrong input source has been selected in the
receiver.
- Check if the disc has been placed upside down in
the tray.
- Check if the disc is clean and undamaged.
- Check if it is a CD or a CD-R (CD-RW is not well
supported).
- Check if the disc is clean and undamaged.
- The unit is positioned on an unstable surface or is
being subjected to undue vibrations.
- The RCA cables between CD Player and the Receiver
are damaged.
- The RCA cables between CD Player and the Receiver
are wound around the power cord.
- The balance control is not correctly adjusted
- The audio input cables have been incorrectly connected
or damaged.
- The input source is defective.
- The speaker cables have been incorrectly connected or
damaged.
- One of the Speakers has become defective.
- The audio input cables have been incorrectly
connected or damaged.
- The pick-up in the CD Player is defective.
- The speaker connection is out of phase.
Check that the positive and negative poles have been
correctly connected, both at the back of the Receiver
and at the back of the speaker
CD/USB Player