Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote Control
Installation of batteries
1. Remove the cover as illustrated.
2. Position two batteries of type AAA/R03/UM4
in the battery compartment. Make sure that the
orientation of the batteries is correct (see drawing at
bottom).
- Do not mix new and old batteries and do not use
different types of batteries.
- If the remote control is not used for prolonged
periods, remove the batteries from the remote control
to avoid corrosion.
3. Replace the cover.
Using the remote control
Direct the remote control at the sensor on the front
panel of the unit. When the remote control signal is
received, the unit reacts accordingly. The remote
control works within a range of 6 approximately metres.
- Sometimes the remote control does not work well in
strong light. You may have to move the unit if it is a
problem.
- Malfunction may occur if other remote controls are
used near the unit.
- Do not place any objects on the remote control, as
the batteries may become flat if a key is pressed
constantly.
- Make sure that there are no obstacles between the
remote control and the unit.
- Do not position the unit behind tinted glass as it may
reduce the maximum range of the remote control.
POW ER
MUTE
EJECT
1
2
3
4
5
6
7
8
9
0
+1 0
RESET
MOD E
SHI FT
UP
BACK
MENU
SEL
DOWN
ALARM
SLEEP
CD/ USB
REPEAT
RANDOM
TIM E
Tuner /Li ne in
ST/ MONO
- TUN NIN G +
AUTO
MEMORY
- PRESET +
AUX1/2
FUNCTI ON
- VOL UME +
Mirco
23
Werbung
Kapitel
Inhaltsverzeichnis
