Cd Functions - VIETA VH-CD041 Benutzerhandbuch

CD Functions
Eject / Load a disc
To load a disc, please press the eject button on the
remote control or on the front panel of the CD player.
If there is no disc in the tray, the message "NO DISC"
will be displayed. If the unit has trouble reading a disc,
you must check if the disc is clean and free from dirt. If
the disc still cannot be played, you must contact your
dealer.
Play / Pause
Press the PLAY/PAUSE button on the remote control
or on the front panel once to start playback; the
counter on the left side of the display will start to count
upwards.
Press the PLAY/PAUSE button once more to stop
playback; to continue playback, press the PLAY/
PAUSE button again.
Fast Forward y Fast rewind
It is possible to perform a search within the track that is
playing.
If you want to search forward, keep pressing the
(forward) button on the remote or on the frontpanel
until you get to the part of the track that you wish to
hear, then let go of the button, you will see that the time
counter in the display counts up very quickly during the
search mode.
If you want to search backwards, use the same
procedure as Fast Forward, but use the
button instead.
Skip Last track and NEXT track
If you want to continue to the next track, press the
(next) button on the remote control or on the front
panel once. If you want to move on several tracks, you
must press until you reach the desired track.
If you want to go to the last track, you must press the
button twice in quick succession to return to the
last track.
STOP
Stops playback.
TIME
Press sequentially to show
- Current track : elapsed time.
- Current track : remaining time.
- Total tracks : elapsed time.
- Total tracks : remaining time.
REPEAT
Press sequentially times to change to the current track,
all tracks and repeat OFF.
RANDOM
All tracks are played in random order.
(Rewind)
31