Gallagher i-Serie Betriebsanleitung Seite 11

Gallagher 3E3115 Alarm System User Manual
External inputs ac vate
External inputs such as a mo on sensor or reed switch can be connected. An alarm
condi on will toggle only Relay 3 (default) OR Relay 1, Relay 2 and Relay 3 depending
on the switch posi on.
External inputs ac va on mode
External inputs can be confi gured either as switch input where the alarm operates
when the inputs are pulled to earth
three inputs and earth (ground) that is J14 or J15 pin 2 and 4) or balanced inputs
(standard security type that require 4k7 termina ng resistors).
3. External Inputs
+15V This connector is rated 2A maximum.
Up to three inputs such as mo on sensors or reed switches
can be connected. These can be confi gured as balanced
(security) or switch inputs. See Func onal Se ngs (p. 8)
for further details.
The external inputs have an exit delay (10 sec to 3 mins) and entry delay
(0 sec to 3 mins) to allow me to exit a secure room a er arming the alarm and to
disarm the alarm when entering a secure room.
Pressing the On/Off bu on arms/disarms the alarm.
4. ON / OFF
Depress the red bu on to turn the alarm system on.
Press again to turn the alarm system OFF.
While in an OFF posi on, ba ery charging con nues.
(ground), (a switch closes between one of the
GND
+15V
GND
Ext in 3
GND
Ext in 2
GND
Ext in 1
9