Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dear customer,
congratulations for buying this high performance power amplifier. To benefit from
all special features please read the following installation instructions carefully. Keep
this manual for further study. Please consult us directly for any further technical
questions:
phone
info@sinuslive.com, www.sinuslive.com
Use:
This amplifier is only meant for a connection to 12 volts DC power supply. The car
battery minus pole must be connected to the chassis ground. Do not connect this unit
to 230 volts or any other wrong voltage. Do not open the housing. Wrong use can
cause serious damages like a shortcut, fire, electric shock etc.
Installation:
The installation should be done by trained personal only! At first remove the minus
cable = chassis ground cable from the battery. Attention: Some settings like the
radiocode, timer, seat memory etc. maybe deleted and must be reset.
The plus cable must have a suitable fuse not further than 30 cm away from the
battery. We recommend a 150 A ANL fuse and a copper cable with a thickness of 35
mm² for a length up to 5 metres.
Sharp edges must be protected to avoid damages to the cable isolation (for example
with a rubber cap).
Install the cable as far as possible from the car-ignition cables and other cables.
For safety and reliability the amplifier must be mounted on a suitable place with the
enclosed screws.
Please take care of:
For the best performance all terminals are 24 k gold-plated. Please also use high-
quality connection parts.
We recommend a sound tuning without using any sound processors and equalizers.
The radio volume should be set in the middle.
+
49-4191-5025
Adequate heat ventilation
Safety from mechanical damage
Dry
Heat resistant surrounding
Close to solid chassis ground contact
Amplifier input-settings within easy reach
-0,
fax
+49-4191-502511,
mail:
7
Werbung
