Operation - Pressalit Care R8141 Pflegeanleitung

3
4
4
Before using the product for the first time
• Check that the control box voltage (model with electric
motor) corresponds to that of the mains electricity supply.
• Pressalit Care supplies a range of toilet brackets and
the installation guides can therefore be different. The
information in this guide is based on correct installation of
the toilet bracket.

Operation

Hand control:
• The toilet bracket can be height adjusted automatically
using the hand control. The hand control can be hung on
the toilet support, wall track or elsewhere for convenience.
Supplied with wall bracket.
Crank:
• For manual height adjustment. Can be positioned on right
or left side of lift unit as required.
Adjustment
Electrical:
1: The toilet can be height adjusted using the hand
control.
3
2: Press and hold the "Up" indicator, toilet will rise.
3: Release indicator to stop.
4: Press and hold the "Down" indicator, toilet will lower.
5: Release indicator to stop.
Manual:
• Turn crank placed under the right or left side of the bracket
to adjust toilet height.
Cleaning
Daily:
• Use ordinary soapy water. Avoid abrasive, corrosive and
chlorine-based cleaning agents. Rinse off with clean water
and wipe with a soft cloth.
• This product cannot be cleaned in an autoclave.
Occasional:
• Removal of lime spots on aluminium parts: Use 3 parts
30% domestic vinegar to 7 parts water, wipe off with a
well-wrung damp cloth (clean water).
4