Hama 00104897 Bedienungsanleitung Seite 5

To install Boombox on Bicycle
To Tie on head tube
To Tie on handlebar
Operation
To pair the Boom Box to a mobile
phone
1. Ensure the Boom Box is powered
off.
2. Ensure the Bluetooth radio on your
mobile phone is powered on.
Please refer to the phone user
manual for details.
3. Hold the power key on the Boom
Box for 7 seconds. Both red and
blue LED turns on, and then
changes to flash alternately red
and blue. The Boom Box is ready
to pair.
4. Set the mobile phone to search
for Bluetooth devices and follow
the instructions on the phone's
8
screen. Please refer to the phone
user manual for details. You will
recognize the device by its
Bluetooth name "Boom Box".
5. Select the Boom Box for pairing.
When prompted for a passkey,
enter "1234".
6. Select the newly paired Boom Box
for connection. Within a few
seconds connection is complete
and a blue LED flashes slowly on
the Boom Box.
To turn Boom Box on
Hold the Power key for 3 seconds.
A tone is heard and the red LED
turns on. After releasing the power
key the blue LED blinks every few
seconds indicating that the unit is in
standby mode.
NOTE:
If the red LED slowly flashes red
every 30 seconds, the Boom Box
battery is low. You should change
the battery in Boom Box as soon as
possible to prevent loss
of power.
To turn Boom Box off
Hold the power key for 3 second. A
tone is heard and the red LED turns
on. The Boom Box is powered off.
To reconnect to your mobile phone
(after initial pairing)
1. The Boom Box automatically
establishes a connection with the
phone after the Boom Box turns
on, and a confirmation tone is
heard.
2. You may reconnect the phone by
pressing the phone key.
To answer an incoming call
Press the call key briefly and release.
Call is answered. Press the key again
to end the call.
To reject an incoming call
Hold the call key for 1 second. Call
is rejected.
Volume Adjustments
You can adjust the volume from (1)
Boom Box, and (2) Mobile Phone
To place an active call on hold
Hold the Backward ( ) button for 1
seconds, the call is placed on hold.
Hold the Backward ( ) button
again for 1 seconds to active the call.
To transfer an active call from the
Boom Box to the handset
Hold the Forward ( ) ) Button for 1
second. The audio is transferred from
Boom Box to handset.
Hold the Forward ( ) ) Button again
for 1 second to transfer the call back
to the Boom Box.
To make a voice dialing
Briefly click the call key to make a
voice dialing, you may cancel voice
dialing by pressing the call key again.
To redial the last number
Hold the call key on the Boom Box for
1 second and release then you will
hear a confirm tone. The last number
is automatically redialed.
NOTE:
Some of the operation functions need
the mobile phone to support these
operation functions. Please refer to
the user manual of the mobile phone
for details.
Use with a PC / Notebook
The Boom Box can be used with a
Bluetooth-enabled PC as a hands-
free device for applications such
as Skype.
9