Quax HAVANA Bauanleitung Seite 51

HAVANA
54 04 26PXLxx
Step 11 : Use the smallest rear profi le EB10, two wooden dowels B and two eccentrics C
Push the wooden dowels (B) into the drillings on the sides of the profi le (EB10). Push the eccentrics (C)
into the holes on the inside of the profi le.
Step 12 : Use both sides EB2 (L and R), four wooden dowels B, ten connectors D, six eccentrics C, eight
hinge mounting plates H, twelve shelves supports F and two clothes rail holders G
Push two wooden dowels (B) in the drillings on top of the sides (EB2 L and R). Push three eccentrics (C) in
the holes on top of the sides. Tighten three connectors (D) in the holes at the bottom of the sides. Tighten
two connectors (D) in the holes at the middle of the sides. Attach the hinge mounting plates (H) with the
provided screws in the drillings at the bottom, in the center and at the front of the sides. Push six shelf sup-
ports (F) in the drillings on the innerside of the panels and make sure they are at the same height. Push
the clothes rail holders (G) in the holes on the top of the side.
Kleerkast met drie+drie draaideuren
Schrankwand mit drei+drei Türen
Armoire avec 3+3 portes
Wardrobe with 3+3 doors
Quax
First dreams
®
First steps
51