Aqua Medic aquarius control Bedienungsanleitung Seite 5

In purchasing this aquarius control, you have selected a top quality product. It has been specifically designed
for aquarium use and has been tested by experts.
Programmable light control for Aqua Medic aquarius
1. Technical Data
- 24 V safety voltage
- dimensions: 11.0 x 6.0 x 2.5 cm
2. Unpacking
On unpacking, please check the light control immediately for any damage. In case of any problems, please
contact your dealer directly.
3. Included in shipment
aquarius control
•
A 'Y'-cable for connecting several aquarius lights to one control unit is available as an accessory.
4. Installation
4.1. Programming
The aquarius control may only be used with the designated socket (pict. No. 1) of an aquarius.
battery will need to be charged before use. After charging, the controller can be switched on independently
from the light by pressing the "M" and "OK" buttons simultaneously.
Fig. 1: Socket for aquarius control
Buttons:
M: menu
OK: confirm
＋
up
－ down
1. The display appears as soon as the controller is plugged into the socket of the aquarius. After pressing the
M button, also the display illuminates. After a few seconds without further keystroke the display lights turn
off.
2. Press "M" (menu), then four setting options appear:
Date and Time: for setting the real time and date
Manual: for manual adjustment
Operation manual ENG
The internal
5