Other Functions; Adjusting The Sound Characteristics; Enjoying Bass And Treble At Low Volume; Loudness Function - Sony CDX-3100 Bedienungsanleitung

Other Functions

Adjusting the Sound
Characteristics
1
Select the item you want to adjust by
pressing the SEL button repeatedly.
VOL (volume) n BAS (bass) n TRE
(treble) n BALANCE (balance) n FADER
(fader) n VOL (volume) n ···
2
Adjust the selected item by pressing
either side of the +/– button.
Adjust within three seconds after selecting.
(After three seconds the buttons will again
serve as volume control buttons.)
Enjoying Bass and Treble
at Low Volume

— Loudness Function

REPEAT
Press the button while pressing
2
SEL button. n "LOUD" will appear on
the display.
The bass and treble will be boosted.
To cancel, press again.

Muting the Sound Quickly

— Mute Function

Press the button. n The "MUTE"
MUTE
indication flashes.
The sound is muted at once.
To restore the previous volume level, press
again.
This function will be also cancelled when:
— + side of the +/– or OFF button is pressed.
— ejecting a CD by pressing the 6 button during CD
playback.
Actual total number:

Muting the Beep Tone

Press the button while pressing
6
the SEL button.
To reactivate the beep tone, press these buttons
once more.
Note
When connecting an optional power amplifier to the LINE
OUT, the beep tone is disabled.
Turning on the Clock
Display

— Power Select Function

Only for cars with an accessory position on the
ignition key switch
To turn the Power Select Function ON
Press the button while pressing
OFF
the SEL button.
The Power select Function ties the clock
display power to the accessory position on the
ignition key switch.
To avoid battery wear, the clock is not
displayed while the unit is initializing.
E
Sony CDX-3100 ( ,F,G,I) 3-856-896-31 (1)
EN
9