Werbung
Controllable Functions
Headlights/marker lights
Long distance headlights
Sound effect: Horn
Switching range (only ABV)
Setting Locomotive Parameters with the Control Unit
1. Requirement: Setup as in diagram on page 20. Only
the locomotive to be changed can be on the track.
2. Press the "Stop" and "Go" at the same time until "99"
blinks in the display.
3. Press the "Stop" button.
4. Enter the locomotive address „80".
5. Hold the control knob in the reverse direction area.
While holding the control knob here, press the „Go"
button.
6. The headlights on the locomotive will blink slowly. If
they don't, repeat Step 2.
7. Enter the register number for the parameter to be
changed (=> List on page 22).
8. Active the change of direction.
9. The headlights will blink rapidly.
10. Enter the new value (=>List on page 22).
Continuously on
function + off
—
f2
—
f3
—
f4
11. Active the change of direction.
12. The headlights will blink slowly (exception: factory
13. Enter the next parameter setting from 6 or end with 14.
14. End the process by pressing the „Stop" button. Then
1
STOP
Headlight button
Button 8
Button 6
Button 4
reset)
press the „Go" button.
5
f8
f8
f0
systems
central
station
60212
mobile station
Headlight button
Button f2
Button f3
Button f4
f0
7
Werbung
