Meaning Of The Leds - Silvercrest SWR 300 A1 Bedienungsanleitung Und Serviceinformationen


Click on
Save to save the settings
entered.
 The wireless repeater will then restart. Wait approx. 30 seconds, then the wireless repeater will
be ready to use. If you carried out the configuration using a network cable, this can now be
removed.
 The wireless repeater is now accessible using the selected SSID.

Meaning of the LEDs

Power LED (1)
WLAN LED (2)
WPS LED (3)
LAN LED (4)
This LED will light up if the device is drawing power.
This LED will permanently light up if there is a connection;
the LED will flash on data transfer.
If the WPS button (5) is pressed, this LED will flash for the
period when a connection is sought (approx. 2 minutes).
This LED will permanently light up if there is a LAN
connection; the LED will flash on data transfer.
SilverCrest SWR 300 A1
English - 65