Opening The Configuration Menu; Setting The Menu Language - Silvercrest SWR 300 A1 Bedienungsanleitung Und Serviceinformationen

Opening the configuration menu

The following describes the set-up in Windows
differ. Open the Internet browser on your computer. Enter http://192.168.10.1 in the address
line of the Internet browser and confirm the entry with the Enter button.
The following window will open. Enter
admin as user name and password
and then click
configuration menu of the wireless
repeater will then open.
If the user name and password window does not open hold down the reset
button (7) for at least 10 seconds and repeat the procedure described above.

Setting the menu language

The default menu language is English. Proceed as follows to change the menu language:
Select the Management tab. Select
the desired language under Select
Language. Finally click on Apply
Settings to confirm the settings.
on OK. The
®
7. The settings in other operating systems may
SilverCrest SWR 300 A1
English - 61