Etherma ONE Betriebsanleitung Seite 18

4. Install the electric dryer so that the lowest tube is at
least 600 mm above the floor.
5. While connecting the radiator to electric installation
ensure that the curcuit has a 30 mA residual-current
circuit breaker and an appropriate overcurrent circuit
breaker. With the permanent installation (cable con-
nection without plug) it is also mandatory to provide
an omnipolar cut-off switch with a minimum contact
opening of 3 mm for disconnecting the device on all
poles.
18
User manual — ONE
Zone 1
Zone 2