Important Information; Installation Information - Duravit D-Code Montageanleitung

Important information

About the mounting instructions
These mounting instructions comes as part of the
Duravit shower tray and should be read carefully prior to
installation.
Explanation of the key words and symbols
NOTE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Target group and qualification
The shower tray must only be installed by trained
plumbing engineers.
NOTE!
Local installation regulations and any country-specific
standards must be observed at all times.

Installation information

Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.pro.duravit.com.
29
Providing for an inspection hatch (Diagram 29)
Area: drain and overflow fittings
Dimensions of the inspection hatch
for drain fittings: min. 10 x 20 cm
30
Closing inspection hatch (Diagram 30)
Sealed to avoid spray water
Only to be opened with a tool
DU_M_D-Code_Flieseneinbau<1000/17.05.5
5